It is necessary to install aluminum rods with appropriate length, correct material, smooth surface without grooves, and guaranteed quality (crystallization, composition, density, and no over-burning) according to the production order requirements and the actual mold conditions. And pay attention to the identification and spacing of different aluminum rods.
Pay attention to the position of the furnace and the width of the chain.
Pay attention to the fact that they are close to each other and not loose (use angle iron to block it, do not use aluminum that is easy to soften at high temperatures) to prevent the furnace from being blocked.
Pay attention to the aluminum rods not to loosen or fall when handling and loading the furnace. Personal injury and equipment accidents. Always check the firmness of chains, pins, runners, tension columns and other equipment. Frequently check the actual temperature of the aluminum rod and the data of the instrument value (not exceeding 560 degrees). If the shutdown time is long, the temperature should be appropriately cooled (below 520 degrees).
Frequently check whether the flame gun operation, circulation fan operation, cooling water (water pump) and other equipment are intact.
